Turbo cockpit - splitting in half

bloodflowers

Member
Joined
Mar 22, 2002
Messages
316
Reaction score
6
Location
Cambridge, UK, United Kingdom
I need to split my Turbo in half to move it in the house, I can see all the bolts you need to undo - does anyone happen to know where the loom connects? Is there a connector in the middle somewhere or do you need to detach it in the main cabinet first and pull the wires though?
 
Well if anyone ever needs the answer to this:

3 bolts along the roof
4 bolts down the bottom on the left
4 bolts down the bottom on the right

Edge the two halves apart about an inch, wiring loom is mostly tucked into the seat side (or it was on mine) - all connectors, pretty easy.
 
Well if anyone ever needs the answer to this:

3 bolts along the roof
4 bolts down the bottom on the left
4 bolts down the bottom on the right

Edge the two halves apart about an inch, wiring loom is mostly tucked into the seat side (or it was on mine) - all connectors, pretty easy.

thank you even if its an old thread [2011], i needed this info.
 
Back
Top Bottom