Tubular locks

shilmover

Well-known member
Joined
Oct 28, 2007
Messages
5,073
Reaction score
586
Location
Washington
I need a couple of locks for my Nintendo Cocktail... I got the pieces that attache to the lock then connect to the hooks to lock/unlock the top. Problem is that they have a small almost rectangular opening (rather than the square one my other locks have). It appears that they are for tubular locks. Anyone know where I can get a couple of cheap locks?

Like this (notice the screw and nut on the left, how the screw is not perfectly round):

img_0106.jpg
 
If you are talking about the barrel shape vs the door/hole shape, twisted quarter is the place I always buy my locks. I always bought the generic keyed ones, but they might all have the same barrel shape anyway.
 
Nope. The actual opening in the Cam.

In the picture below:

10357.jpg


The Cams on the bottom left. Looking for a couple that dont cost $6+ each :001_ssuprised:
 
No more locks left, but still have a few "copies" of K6510 keys. The locks 7/8" locks that Twisted Quarter sells fits perfectly into that cam setup.
 
Back
Top Bottom