tube swap question

sconfu

Active member
Joined
Mar 17, 2009
Messages
441
Reaction score
27
Location
Illinois
so ive got a known good tube 10 pin and 43.3 / 1.8 ohm

i was going to order a board from alva but would a G07 chassis work?

ive got one lying around and was wondering

Brian
 
The yoke is high impedance, and G07 usually uses a high impedance yoke, but the vertical/horizontal for the G07 is 54.4/2.5. It might work, and it might not...
 
The yoke is high impedance, and G07 usually uses a high impedance yoke, but the vertical/horizontal for the G07 is 54.4/2.5. It might work, and it might not...


Is there a table or list available with all known impedance values for the the most popular chassis (i.e. G07, 19Kxxxx, etc)?
 
The G07 yoke connector pinout is different than other manufacturers.

You'd probably be better off ordering a universal replacement chassis like a Wei-ya model 820H.
 
Back
Top Bottom