Tube swap advice needed!!

Teknotoyz

Well-known member
Joined
Aug 15, 2009
Messages
2,428
Reaction score
34
Location
BUFFALO, West Virginia
I was wanting to ask your advice on a tube swap.

Arcade monitor (badly burnt)
WG 7900 Tube A48ABK05X Philips
G/Y = 13 ohms
B/R = 3.4 ohms

TV (I'll get the model for you)
Tube: A48AFN22X Philips
G/Y = 14.3 ohms
B/R = 6.2 ohms

From the rejuve instructions
Both tubes match: Heater = 6.3 and CR/CA = 31


Do you think these would swap without messing with the yoke?
 
Anyone have any advice?
If this doesn't work, any danger of chassis damage?

I would not use the TV yoke being the variances are too far off, especially the HORZ. Use the matching yoke for the chassis which is simple to do.
 
Back
Top Bottom