Tube swap 13 pin neck sanyo w/19 inch tube

Thomas

Well-known member

Donor 2021
Joined
Jan 23, 2009
Messages
3,726
Reaction score
75
Location
Virginia
This 1978 Sanyo 19 Tv Cost me 5 bucks. Tube#MV19VJCP22 it also has a 13 pin neck board.

I never know when I buy these old arse tv's and have yet to find one that will fit a G07. I did find one once for a frogger or something like that but I didn't have well a frogger.

So did I win the lottery this time?
 

Attachments

  • DSCN4353.jpg
    DSCN4353.jpg
    93.1 KB · Views: 22
  • DSCN4355.jpg
    DSCN4355.jpg
    97.8 KB · Views: 28
  • DSCN4356.jpg
    DSCN4356.jpg
    95.6 KB · Views: 29
  • DSCN4357.jpg
    DSCN4357.jpg
    94.3 KB · Views: 21
Well, considering the neck connector isn't the standard CR23 used in arcade monitors, it won't work in a G07. That looks like a delta gun tube - probably will work in a WG 4500.

Edit: But, then again, I don't see any convergence assembly in there, so it's probably inline gun. Don't know if any monitor would use that. According to the setup chart, it uses a CR25 adapter. Just put the back on it and use it as a TV.

-Ian
 
I get screwed every time I buy an old tv.

http://www.bkprecision.com/support/downloads/pdfs/CRT_Setup_Chart.pdf

I have got to remember to print this chart out and put a copy in my truck and car. It is getting old trucking them back to the dump.

No biggie i am still way ahead of the game today. This old Tv was rolled into a lot of crap I bought for 84 bucks today in which I snagged an old air compressor on a killer dolly.

One day I will id the other tv's I have out in storage.
 
Looks like that is a CR-25 neck.

When looking for TV's, try to find ones with a manufacturing date of late 80's to early 90's. Then see if you can tell if the neck is wide or narrow (wide for the G07.

And while the list of all the A48's (that someone posted in another thread) is a good thing to have, it is NOT the complete list of all the CR-23's...
 
Thanks guys... This one is going to the dump along with another cr25 I checked today. I did come out on top with one that's is a cr23 so i am a little stoked.

1 of 3 for today im good with that. I still have a big zenith 25 to do but it can wait.
 
These are the ones that did not work out for me.

Oct. 1978 Sanyo Model#91C71 19' Tv - Tube#MV19VJCP22 = CR25
April 1987 JC Penny Model#685-2139 19' Tv - Tube#A48ABW20X = CR25

However I did round up 1 CR13 in the thread below...

http://forums.arcade-museum.com/showthread.php?t=148190
 

Attachments

  • DSCN4381.jpg
    DSCN4381.jpg
    93.4 KB · Views: 10
  • DSCN4382.jpg
    DSCN4382.jpg
    92.8 KB · Views: 5
Last edited:
FYI - I added those "do not buy" tvs to my tv list. Great idea to put ones that didn't work out so they're found quickly in a search!

Sooner or later I'll reformat the page to be a little more friendly, time is limited right now though.
 
Back
Top Bottom