Trying to rewire a 3000x Mirage Control panel

Shawn1976

Well-known member

Donor 10 years: 2016-2025
Joined
Apr 17, 2008
Messages
8,767
Reaction score
460
Location
Saint Augustine, Florida
I have a 3000x Mirage control panel that the ribbon cable has broken traces. I was going to rewire the panel with buttons, but I'm having trouble finding which wire leads to what.
I'm needing directions as to which wire goes to each pin out.
Can anyone please help me out with this?IMG_6990.jpegIMG_6991.jpegIMG_6992.jpeg
 
I can only provide the following suggestion:

Find your Ouiji Board.

Try to summon Ken Layton. I'm sure he has the information.
 
Figured it out on my own.
If anyone is interested the following is the ribbon cable pinouts:

Pin 1 - page turn >
Pin 2 - page turn <
Pin 3 - play hits
Pin 4 - view hits
Pin 5 - 1
Pin 6 - 2
Pin 7 - 3
Pin 8 - 4
Pin 9 - GND
Pin 10 - 5
Pin 11 - 6
Pin 12 - 7
Pin 13 - 8
Pin 14 - 9
Pin 15 - 0
Pin 16 - Reset
Pin 17 - GND
 
Hello my name is Jim I have the same jukebox that you have and I am having to build my button board from scratch. I was wondering if you knew if pins 1 through 8 used the pin 9 as ground and pens 10 through 16 used pin 17 as ground?
 
I believe that you're correct.
Off topic I've been looking for someone to take a photo of the light assembly at the front of the game if your juke box has it.
 
Are you talking about the fluorescent tube in the top half of the juke box
 
Yep, mine has that one. I'll take a picture of it and attach it tomorrow
 
I'm specifically looking for the rotating piece of plastic on the right side of the assembly.
I have this jukebox and a 4000x trilogy that are both missing these assemblies.
Was looking to actually see what the part looks like as well as seeing if the part could be scanned to be 3D printed.
I've attached the area on my 4000x on that bottom front light assembly. Photo 2 is where this piece should be and some photos (photo 3 and photo 4) of the broken part I'm looking for.IMG_6160.jpegIMG_6162.jpegIMG_6163.jpegIMG_6164.jpeg
 
Last edited:
Hope those help. If you need something different as far as pictures go let me know
 
I'm specifically looking for the rotating piece of plastic on the right side of the assembly.
I have this jukebox and a 4000x trilogy that are both missing these assemblies.
Was looking to actually see what the part looks like as well as seeing if the part could be scanned to be 3D printed.
I've attached the area on my 4000x on that bottom front light assembly. Photo 2 is where this piece should be and some photos (photo 3 and photo 4) of the broken part I'm looking for.View attachment 716588View attachment 716589View attachment 716590View attachment 716591
I'm sorry I just now seen the other photos that you were talking about and my jukebox does not have the ability to rotate the color tube
 
I have a jukebox in my shop that I haven't started a rebuild on yet and I will look to see if it has that option in it and if it does I will take pictures
 
Looks like the Mirage doesn't have the same setup as the Trilogy….
As for the other jukebox, yes please.
Appreciate all of your help.
 
Back
Top Bottom