Trouble with EGA to VGA GBS-8220 converter on Tekken Tag

DJLC

Member
Joined
Mar 6, 2012
Messages
197
Reaction score
2
Location
Saint Louis, Missouri
Trouble with EGA to VGA GBS-8220 converter on Tekken Tag

I'm having this problem with the Ver 3 GBS-8220 converter board:

Pretty much this happens constantly and its annoying as ever-loving get out.

http://www.youtube.com/watch?v=IGJug4ozdlc

It just won't hold the picture at all and it'll even not sync to the point where it says No Signal. I am using the D-Sub 15 port on the System 12 board instead of the JAMMA RGB. I am running it on a 23 inch LED Samsung monitor. I've tried holding the Auto button for like 10 seconds but it does nothing.

If anyone has got any idea how to fix this, I'm all ears.
 
This may or may not work but I had a similar issue with one of these on a Rush. Try setting "Clamp st" to "03" and "Clamp sp" to "04" and see if that helps.
 
Back
Top Bottom