Tron Video Sync Cable repair tips

Madaracs

Well-known member
Joined
May 25, 2005
Messages
2,351
Reaction score
41
Location
Golden Valley, Minnesota
'Lo all.

I was hoping to get some tips on how to repair the video sync connector for my tron machine. Not the 6 pin that connects to the monitor chassis--but rather the end that connects to the board itself. It's been loose for awhile but it barely stays on now.

I've removed some of the offending leads and bent the pins out with a very small thin screwdriver and that helps but I was wondering if:

a. Is there any new parts or NOS parts for this or other Midway games
b. Is there a new or NOS part I can purchase for just the pins so I can rebuild the connector?

Cheers,

-=Mad=-
 
Very easy fix, but I do not recall exactly what that connector looks like. I have the parts you need, but I need to see a pic of the offending connector.
 
Screenshots of Tron Video Sync Cable

connector1.png


connector2.png
 
Thanks, I'll contact him! I just ordered a bunch of other stuff too.

Though, I think I'd still like to rebuild it too. Are they .100 size pins?
 
Last edited:
Back
Top Bottom