Tron Spinner

copious

Well-known member
Joined
Oct 16, 2006
Messages
2,224
Reaction score
94
Location
Sparta, New Jersey
Just installed a switcher on my newly aquired TRON and the only part that's completely out is the spinner. I get nothing the diagnostics page. Everything looks to be intact....where should I begin I never had a spinner problem before? Could the voltage be an issue.
 
Try wiggling the connector while spinning it to see if it works. I had that problem in the Tempest you sold me, and when I re-flowed the solder, that cleared it right up. Not sure what the tron spinner looks like off the top of my head though.
 
Back
Top Bottom