scamp
Member
I have another thread floating around on this but am hoping a new thread will catch more eyes...
My problems originally started with a "jittery" or "fluttering", inprecise spinner....now it doesn't work at all...
I've checked 5v and 12v at spinner..there is power...
I've checked continuity between the spinner and the connection at the SSIO and its there...
Is there a way to "see" the optics flashing (or not)? (maybe bad optics?) I was told another spinner was triend in the cabinet and it depicted the same behavior...How do I rule-out the optic board??
Then its the SSIO board...and tests there as they associate to the spinner? (remember I already did continuity where the harness meets the board)
Thanks!!
My problems originally started with a "jittery" or "fluttering", inprecise spinner....now it doesn't work at all...
I've checked 5v and 12v at spinner..there is power...
I've checked continuity between the spinner and the connection at the SSIO and its there...
Is there a way to "see" the optics flashing (or not)? (maybe bad optics?) I was told another spinner was triend in the cabinet and it depicted the same behavior...How do I rule-out the optic board??
Then its the SSIO board...and tests there as they associate to the spinner? (remember I already did continuity where the harness meets the board)
Thanks!!