gameonnow
New member
I am having an issue with the tron spinner, if the control panel is clipped into the cabinet then the spinner will make Tron do a Saturday night fever impression, where the arm will go from the bottom to the top then back to the bottom and then it will flip and do the same thing.
However....
If I unclip the control panel and lift it slightly then the spinner works perfectly, if the control panel is in the cabinet and not clipped in then it will jitter but move roughly in the right way.
Any suggestions?
However....
If I unclip the control panel and lift it slightly then the spinner works perfectly, if the control panel is in the cabinet and not clipped in then it will jitter but move roughly in the right way.
Any suggestions?
