SOLD - PARTS TRON PCB (needs repair) $340 Shipped

Well, it's really Hard for me to check it while Its in the cabinet and I don't have a test bench.
I was looking at the board following the path the 12v takes and noticed a couple resistors appear to be missing here. At c133 and 134.
Not sure why they aren't there , would that affect anything.
Thanks again for the help.
those are capacitors, and they're removed from the factory. The inductor (or choke) right above them is the one that blows up when the tantalum caps on the 12v rail short out.
You can test it. It should have continuity. If it doesn't, replace it with a wire jumper.

Edit- it might be the choke below them. Check both.
 
Back
Top Bottom