Museum of the Game® & International Arcade Museum® Forums
**ONLY 4 LEFT of the TRON version!!!*
I also have some for EDOT, DOT, GORF and XENOPHOBE (ONLY 2 LEFT of this version)
-------------------------------------------------------------------------------------------------------------------
I had so many people messaging me when the last batch sold out in hours that I decided to do 1 more.
TRON Joystick Bumpers
***BRAND NEW*** Reproduction
Replaces part # 0628-00909-000
***You will receive 1 bumper with each order***
We had these made in 2023 and Sold Out immediately. We ended up doing a 2nd batch in 2023 and that also sold out. I just had a batch done in late 2024 and it sold out in hours.
These are for the ORIGINAL TRON joystick by Midway Bally Only!!! These will NOT work in an arcade1up or any aftermarket joystick.
Reproduced from the ORIGINAL Bumper
This is NOT a cheap 3D Print! A custom mold was made specifically for this bumper and these were cast.
NEW Reproduction Tron Midway Arcade Bumper 4/8 way hybrid restrictor Midway 0628-00909-0000 Note that unlike the Gorf, Xenophobe, and Happ Control sticks, this one has a DIAMOND shape so that it works mostly like a 4 way joystick until you jam it in the corners and make it 8 way for the "CONE" and "SPIDER LEVELS" on Tron.
This is NOT the centering ring that fits lower down on the joystick. This prevents you from accidently pushing your joystick into the corners causing 2 switches to be pressed at the same time like an 8-way joystick. This is flexible and does allow you to go into those corners but only when forced.
The original TRON bumpers have hardened, cracked or even broke over the years. This replaces the original part.
Remember that TRON is a hybrid 4-way joystick but allows you to go into the corners like an 8-way but only when forced for the "CONE" and "SPIDER" levels.
Please look on the joystick schematic that we posted here to see what this part replaces. (Red arrow pointing to the part)
Color may vary slightly from the picture
$25 for the 1st bumper (INCLUDES shipping in the US) $20 each for any additional bumpers.
I hope this final batch takes care of everyone who still needs one. I also wanted to say thanks to everyone who helped with this project.
I also have some for EDOT, DOT, GORF and XENOPHOBE (ONLY 2 LEFT of this version)
-------------------------------------------------------------------------------------------------------------------
I had so many people messaging me when the last batch sold out in hours that I decided to do 1 more.
TRON Joystick Bumpers
***BRAND NEW*** Reproduction
Replaces part # 0628-00909-000
***You will receive 1 bumper with each order***
We had these made in 2023 and Sold Out immediately. We ended up doing a 2nd batch in 2023 and that also sold out. I just had a batch done in late 2024 and it sold out in hours.
These are for the ORIGINAL TRON joystick by Midway Bally Only!!! These will NOT work in an arcade1up or any aftermarket joystick.
Reproduced from the ORIGINAL Bumper
This is NOT a cheap 3D Print! A custom mold was made specifically for this bumper and these were cast.
NEW Reproduction Tron Midway Arcade Bumper 4/8 way hybrid restrictor Midway 0628-00909-0000 Note that unlike the Gorf, Xenophobe, and Happ Control sticks, this one has a DIAMOND shape so that it works mostly like a 4 way joystick until you jam it in the corners and make it 8 way for the "CONE" and "SPIDER LEVELS" on Tron.
This is NOT the centering ring that fits lower down on the joystick. This prevents you from accidently pushing your joystick into the corners causing 2 switches to be pressed at the same time like an 8-way joystick. This is flexible and does allow you to go into those corners but only when forced.
The original TRON bumpers have hardened, cracked or even broke over the years. This replaces the original part.
Remember that TRON is a hybrid 4-way joystick but allows you to go into the corners like an 8-way but only when forced for the "CONE" and "SPIDER" levels.
Please look on the joystick schematic that we posted here to see what this part replaces. (Red arrow pointing to the part)
Color may vary slightly from the picture
$25 for the 1st bumper (INCLUDES shipping in the US) $20 each for any additional bumpers.
I hope this final batch takes care of everyone who still needs one. I also wanted to say thanks to everyone who helped with this project.