Tron inner side art question....

solo742

Member
Joined
Jan 14, 2010
Messages
550
Reaction score
2
Location
Colorado
Ok. got the art package from Phoenix Arcade, and everything looks awesome.

Inner side art, not cut to fit, so does anyone have a template to copy? I am finally getting close to being done with the restoration.

Any help would be greatly appreciated.

Jim
Solo742
 
Sorry no template.
I made one out of paper & masking tape when I did mine a couple years ago though.
I remember thinking how odd to not have it cut the right size at the time of production.
Anyone know why this is?
Good luck.
 
I've got a pic of what it should approximately look like in my restoration thread:
http://forums.arcade-museum.com/showthread.php?t=114727

However, like Scramble said, just use various pieces of paper and masking tape to make your own. Darin said that he makes them that way because everyone's machine is slightly different. Don't know if that's true or not, but that's what he said. Some words of warning:
-Measure twice, cut once
-Make sure everything's prepped well...I've noticed that after 2 months, I've had some bubbling under mine. I don't know if it's because I applied it too quickly after I painted (only 1 day dry time) or if there was some Goo Gone in the particleboard that leeched through my paint. Either way, be warned.
-It's a real pain to get straight, so go slow.
-Watch the sides of the control panel when you put it back in...the metal is sharp, and it's a tight fit.

Good luck!
 
Yes, it does. Just make sure you cough up the extra for Phoenix Arcade's product...the service and quality can't be beat!
 
Back
Top Bottom