tron cocktail player 2 control wiring

MBDMTRASDL

New member
Joined
Feb 14, 2010
Messages
4
Reaction score
0
Location
Illinois
greetings,
I have a tron cocktail where the number 2 player control has had the molex connector cut off between the control panel and the main wiring harness(both sides of connector missing)...
the wire colors on the main harness are:
white/black(2 stripe)
green/red
black/red(2 stripe )
brown
brown/blue tracer
orange/red tracer
black/brown tracer
black/yellow tracer
green/purple tracer

the control panel has the following colored wires:

brown
green/red tracer
white/black stripe (1)
black/blue tracer
black/red stripe (2)
blue/green tracer
orange/red tracer
black/brown stripe(2)
brown

this is the connector that has a 3 x 3 pin pattern in a 3x4 connector

i have new 9 pin connectors, but need to know what gets connected to what....
player #1 wires are completely different in color

any help is appreciated
mike
 
thanks....saw that in the manual, but 3 of my wire colors didn't pass thru...a little improvision and player #2 is now up and running....thanks!
 
Back
Top Bottom