SOLD - PARTS Trash Can full of Harnesses

Cuda

Well-known member
Joined
Jul 25, 2011
Messages
1,410
Reaction score
169
Location
Olathe, Kansas
Rating - 100%
50   0   1
I have a storage locker that I have to clean out this weekend from a warehouse raid. One thing in there is a kitchen size trash can that is packed full of various harnesses some of them obviously have cut wires from being removed.

If there are any interests make me an offer and I will put them in a box and ship them to you.
 
Last edited:
Pictures

Ok lots more interest than I thought on this.

Here is a picture of the pile and the trash can it fills to give you an idea of how much is there.

Question for those of you interested and my thoughts are its going to take a big box to fit them all in and they weigh at least 30 lbs or more so shipping is a big question. My guess from shipping other stuff is the weight is going to make shipping like 40.00 or more, unless you have a cheaper option other than UPS or USPS.

So with the shipping cost in mind those of you that are offer less than that for it shipped, LOL forget it, I am not paying you to take these.

Hope you can look at the picture and get an idea of what is there.
 

Attachments

  • harness pic.jpg
    harness pic.jpg
    199.2 KB · Views: 221
Wouldn't mind these myself, however, posting to point out that the most cost effective way to send a bunch of these harnesses is to stuff them in the different flat rate boxes the USPS has. You can compact a pretty good amount into them. Might be most cost effective.
 
Wouldn't mind these myself, however, posting to point out that the most cost effective way to send a bunch of these harnesses is to stuff them in the different flat rate boxes the USPS has. You can compact a pretty good amount into them. Might be most cost effective.

Flat rate box o stuff at $x each. I may be in for one....
 
Did these get sold? I'm just curious what they ended up being?

Scott C.
 
Apparently he did not like my "serious" offer of 15.00 Plus Actual Shipping. Oh well no biggie.
That's too bad as it looked like some good wiring in there (possible Williams, if I'm right).

Scott C.
 
Just pulled this up from my mail:

Cuda said:
Ok I found some large flat rate shipping boxes I had PCB's in.

I was able to stuff it all into 2 of the boxes, and I mean STUFFED. The sides are bulging out so I wrapped them both with packing tape to hold them together. So as long as the post office doesn't say anything we can get them shipped out in two boxes.

18.75 x 2 for shipping of the two boxes and 30.00 for a total of : 67.50

paypal 67.50 to: XXXXXXXXXXXXXXXXXXXXXXXXXXX

And please cover the paypal fee if you don't send it using the friends and family gift option.

Then pm me your shipping address and I will get it on both boxes and ship them first thing Monday morning and then I will pm you the tracking numbers.

Thanks,
Darren


Pretty sure I was the one who bought this from Cuda.
 
Last edited:
Back
Top Bottom