FS Game: (Trade too) Buck Rogers & Eight Ball Champ- SE Wisconsin

Tim N.

Member
Joined
Sep 13, 2007
Messages
289
Reaction score
1
Location
Helenville, Wisconsin
Rating - 100%
3   0   0
(Trade too) Buck Rogers & Eight Ball Champ- SE Wisconsin

I am eyeball deep in refurbs for other people (and a couple for myself) and need to move some stuff out for space in my basement. These are machines I have taken in on trade that I was eventually going to refurb, but time is a huge issue right now. Both should be considered light projects, but both are fully playable and would be considered shopped by "playfield wipers". Keep in mind, I have not fully gone over these with a magnifying glass, I just hit the ball around on them while I refurb other machines.

The link to the full photo galleries are below:

Eight Ball Champ ($600)
https://picasaweb.google.com/114677989241940608218/EightBallChamp?authuser=0&feat=directlink

Cabinet is nice with some minor scuffs and scrapes, coin door could use a cleaning, playfield is pretty nice with factory mylar, but there is some minor playfield wear in the upper rollover area (black area only, EASY touchup), has Eight Ball Deluxe bumper caps and blue rollover lane covers. Upper right flipper is not holding up (works fine, doesn't hold when flipper button is held), and I am hearing no voices (I believe it is supposed to say something along the lines of "start Chalking and stop talking"), all of the sounds of the game work fine, so I am not sure if a setting is disabled or if it something else.

Buck Rogers- ($450)
https://picasaweb.google.com/114677989241940608218/BuckRogers02?authuser=0&feat=directlink

Cabinet is solid but has some flaking in various spots, Backglass has seen some better days with the brunt of the pinholes being on the woman. Completely new aftermarket boardset (with the original boardset included)- I didn't even test the old boardset, the new boardset was in it when I bought it, Playfield is in surprisingly nice shape, with just some minor wear in various places (all in places that are easy touchups), mylar rings around pops need to be replaced, The sound board is not functioning, it just gives off a static sound, but haven't had time to see what the issue is, looks like it is a pretty basic board.

I am sure I am forgetting stuff, but that is the brunt of what I can recall, like I said, I just keep them around to play while I work on other stuff, and both are definitely very playable.

If you are interested in a trade, I most likely will only be looking for a 2 for 1 (my two) as trading for two other machines doesn't help my space situation.
 
Back
Top Bottom