Track and Field cardboard bezel install - any pictures?

joeycuda

Well-known member
Joined
Aug 17, 2009
Messages
14,522
Reaction score
990
Location
Madison, Alabama
Track and Field cardboard bezel install - any pictures?

I have a favor to ask, actually for someone who bought one of the T&F cardboard bezels that I've sold. I know that the 2 side pieces attach with double sided tape, but I don't have installation instructions or a good reference pic.

Does anyone have a good pic showing the bezel installed and how the side pieces attach?

Thanks in advance, I'm sure a few folks would benefit.
 
I got this one from prok years ago, but just used it about 1 1/2 years ago. Not sure if you built yours the same way or not, but here are some pics.

Sorry for the shitty quality pictures, hopefully they help illustrate what you are looking for.

a couple of shots inside the back of the cab you can see I had to use some tape. I let it sit for too many years and it didn't hold together very well. I am pleased with it for sure.
 

Attachments

  • 001.jpg
    001.jpg
    90.2 KB · Views: 89
  • 002.jpg
    002.jpg
    96.3 KB · Views: 86
  • 009.jpg
    009.jpg
    98.5 KB · Views: 78
  • 012.jpg
    012.jpg
    95.9 KB · Views: 84
  • 014.jpg
    014.jpg
    92.5 KB · Views: 80
few more pics from the back of the cab, they probably are hard to look at, sorry.



On a side note, do you do donkey kong bezels?
 

Attachments

  • 006.jpg
    006.jpg
    97.6 KB · Views: 64
  • 007.jpg
    007.jpg
    94.1 KB · Views: 59
  • 008.jpg
    008.jpg
    92.6 KB · Views: 53
if anyone has any decent pics of this that actually shows a wider area for reference before going to extreme close-up, please feel free to post up to help the rest of us out...

...and maybe with the glass/plexi removed so we can see through the glare

...and that's actually a track & field and not a hyper sports
 
I got this one from prok years ago, but just used it about 1 1/2 years ago. Not sure if you built yours the same way or not, but here are some pics.

Sorry for the shitty quality pictures, hopefully they help illustrate what you are looking for.

a couple of shots inside the back of the cab you can see I had to use some tape. I let it sit for too many years and it didn't hold together very well. I am pleased with it for sure.

if anyone has any decent pics of this that actually shows a wider area for reference before going to extreme close-up, please feel free to post up to help the rest of us out...

...and maybe with the glass/plexi removed so we can see through the glare

...and that's actually a track & field and not a hyper sports


the 5th picture in my first post in this thread breaks it down pretty good. Where I find guys struggle is in the back of the cab where the bezel gets bent into 2-right angles and shoves into position. I couldn't get a good pic of that.

and it doesn't matter if it's hyper sports vs track and field, unless it's a color thing that bugs you.
 
the 5th picture in my first post in this thread breaks it down pretty good. Where I find guys struggle is in the back of the cab where the bezel gets bent into 2-right angles and shoves into position. I couldn't get a good pic of that.

and it doesn't matter if it's hyper sports vs track and field, unless it's a color thing that bugs you.

yes, figured it out finally...the long wood piece on each side is blue on track & field vs. black on hyper sports and I was trying to figure out how people had it so the blue was covered up...didn't realize there were an additional two side pieces in joeycuda's kit to cover them up.
 
Back
Top Bottom