mike11
Active member
Here's the issue, I have a bally game maker ...... got 3 of these with board probs, bad batts ect ...... fixed the boards game boots and plays fine .... 2 of the 3 use OLD microtouch controllers ... parallel port units .... guys around in this a long time will remember them from way back,3rd one has a smt3 what we are familiar with in the megas .... have a 14428 chassis from a mega that's NOS I stumbled on, put that in the mon with the smt3 and all is well, game works fine, outa the blue it stopped. From that point I swapped
Overlays
Controller 6 different ones
Verified wiring from controller to game board with DOM
Controller responds to touch but game don't see it when it comes on
I ended up rebuilding one of the other monitors with the OLD controllers and they work fine
What am I missing here ?? Obviously the smt3 units can be used cause it did have one on it and it did work with it, but when it stopped I haven't been able to get it working since
Driving me nuts for a few days now .....
What can possibly be the cause ??
Thanks
Overlays
Controller 6 different ones
Verified wiring from controller to game board with DOM
Controller responds to touch but game don't see it when it comes on
I ended up rebuilding one of the other monitors with the OLD controllers and they work fine
What am I missing here ?? Obviously the smt3 units can be used cause it did have one on it and it did work with it, but when it stopped I haven't been able to get it working since
Driving me nuts for a few days now .....
What can possibly be the cause ??
Thanks