Total noob electrical question.

AdamUnRama

New member
Joined
May 2, 2010
Messages
31
Reaction score
0
Location
Salem, Oregon
Okay, I just got a new power supply, a Single fan 250/150 v. The wires out connect to molexi ( is that plural for molex, molexes?). Can I just take the wires from the JAMMA harness and connect them to the female end of the molex, then connect that to the power supply? I am assuming I can, as long as I keeep the wires "grouped" together. Thanks in advance.
 
I assume you are going to crimp pins on the wires to the jamma harness and insert them into molex housings that will connect to the ones on the power supply.
If so then you just need a pin out for the power supply and then put the wires in the proper locations on the connectors.
 
Okay, I just got a new power supply, a Single fan 250/150 v. The wires out connect to molexi ( is that plural for molex, molexes?). Can I just take the wires from the JAMMA harness and connect them to the female end of the molex, then connect that to the power supply? I am assuming I can, as long as I keeep the wires "grouped" together. Thanks in advance.

It's cake... like jimkirk said...

text me on your phone or something... I can help you figure it out... or, you could just pay me gas, and I'll come do it for you, and give you those items you bought
 
Back
Top Bottom