skramarck
Member
I have some parts available from a Mr. Do conversion cab that was gutted for a mame machine (it was too gnarly a cabinet for much else). When the game was fired up, it worked but was missing some characters on screen during play. Not sure if this is a Rom issue or if its because some of the wires at the connector were chewed by mice. Might be worth something to someone who needs some Mr. Do parts. I also have the joysticks and buttons, all working (although the e-clip flew off of the joystick and I can't seem to find it...25 cent part at any hardware store though). Finally, there is the Toshiba monitor. It powered up and had a decent image on screen. There is significant screen burn, but if any of the parts are of use, please let me know.
I'm open to offers for anything that is useful to someone...if not, off to the attic they go. I'll ship anything except the monitor. That would have to be local pickup (I would ship the chassis if that is what someone wants)
Again, it isn't much, but if it can help someone out, I wouldn't mind opening up some room in my garage! If you have specific questions, fire away. I am located in Delaware
Steve-
I'm open to offers for anything that is useful to someone...if not, off to the attic they go. I'll ship anything except the monitor. That would have to be local pickup (I would ship the chassis if that is what someone wants)
Again, it isn't much, but if it can help someone out, I wouldn't mind opening up some room in my garage! If you have specific questions, fire away. I am located in Delaware
Steve-