FS Game: Tons of Working PCBs: Ghouls 'N Ghosts, Cyberball 2072, Alien Syndrome, Side Arms, +

M3Patterns

Member
Joined
Apr 26, 2012
Messages
101
Reaction score
0
Location
Arizona
Rating - 100%
19   0   0
Tons of Working PCBs: Ghouls 'N Ghosts, Cyberball 2072, Alien Syndrome, Side Arms, +

I just got a bunch more PCBs here, and just about all of them work 100%. Woot! They came from a guy's private collection and were stored in antistatic bags for the past few years. He said he barely played his jamma cab, so he was getting rid of everything. Before that they came from his friend who I believe was an arcade operator.

All tested games will be tested once again before being shipped out. All games will be shipped in ESD protective bags and will be packed to survive multiple throws against a wall. :)

As these prices are shipped, you will get a pretty good discount on more than one.

Paypal gift would be nice, but not required.

All games in the list directly below are tested and work 100%, with some conditional things noted below. For all Sega 16 games (Alien Syndrome, ESWAT, Golden Axe, Shinobi) I wasn't able to test the sound, as the adapter needs to have some pins shorted. I've got jumpers, but I haven't had time to test yet, so they will be tested again, but for now the price is as if the sound was working 100%.

Here are the games:


Alien Syndrome (Pic) $135 shipped

Black Tiger (Pic) SOLD!

Break Thru (Pic) SOLD!

Tournament Cyberball 2072 (2 Player Jamma) (Pic) $165 shipped

Double Dragon (Pic) SOLD!

Double Dribble (Pic) $25 Shipped

ESWAT Cyber Police (Pic) Bottom left cap on top board needs replacing (C101). Still works great - I didn't notice anything while playing. $80 Shipped

Ghouls n' Ghosts (Pic) SOLD!

Golden Axe (Pic) Missing upper right cap on top board, damage to an IC on the bottom board. Still works great - I didn't notice anything while playing. $100 Shipped

Jail Break (Pic) SOLD!

Magic Sword (Pic) Just the B & C boards. You'll need a CPS1 A board. $65 Shipped

Nastar Warrior (Pic) $75 Shipped

Shinobi (Pic) $75 Shipped

Side Arms (Pic) $95 Shipped

Super High Impact Football (Pic) $35 Shipped

Superman (Pic) SOLD!

Yie Ar Kung-Fu (Pic) $65 Shipped


Official Sega 16 Jamma Adapter (Part # S25-0003) (Pic) Not quite sure what to charge for this, as it seems to be slightly hard to find. You can wire a volume pot and test and service switches to it as well. Feel free to $Make offer on this.

I also have two non working Kung Fu Heroes PCBs (with an included hand wired jamma adapter I was using, which may be the problem, as both are labeled working) and a Gate of Doom that I believe just needs one 74XXXX chip replaced for it to work. I also have a non working CPS1 A board. $Make offer on any of these.


Here are the other PCBs I have left over to combine this with my other thread:

Two Crude (Pic) Works 100% SOLD!

Tekken 2 ver. b (Pic) Works with graphical glitching across the whole screen. I think I tried to reseat some stuff, but I can't remember. $25 shipped

World Rally [x2] (PCB1) (PCB2) Both PCBs work 100% $50 shipped each

Gyruss (Pic) Video works, but I could not get audio to work. I haven't tried reseating or cleaning anything yet. $Make Offer

Heavy Barrel (Front)(Back) Works, but has lines across the sprites. I didn't try reseating the roms. I may be keeping this one, though. $40 shipped

Raiden (Pic) Works with some missing sprite lines. I traced this to a QFD with 4 legs that came unsoldered. 1 was soldered back on (I thought it was just one leg) but 3 others need to be as well, and I haven't had time. It looks like there is may be a broken trace somewhere as well, as sometimes the game won't come on or will stop unexpectedly, but will after a careful flex to the board. However, it may just be that the edge connector is too worn or the roms aren't sitting properly, although I did reseat them. I'll probably keep this as I love Raiden and it should be a somewhat easy fix, hence the price. $70 shipped

Street Fighter II [Probably Bootleg CE - M5] (Pic) Tested - colors on sprites are way off and there is some shakiness to the top of the picture. Found capacitor that was loose. Will be soldering back in. Not quite sure of pricing $Offer

NBA Jam (Pic) No sound board. I could not get it to work, although I haven't tried reseating the roms or cleaning anything yet. $Offer

Beer Frame Bowling (Pic) Almost worked after a few tries - didn't try to reseat roms, although these is some (superficial?) damage to one of the chips. $Offer

Paint 'N Puzzle (Pic) (Pic2) Could not get it to work. $Offer

Slickshot (Pic) Couldn't get to work, didn't try reseating roms. $Offer

Chicken Dash (Pic) Untested. $Offer


I also have this random stuff:

Merrit Pit Boss or Video Poker board (Pic) (Pic2) Untested
Fruit Bonus '96 Special (Pic) Untested
Home Run Classic PCB (Pic) Untested
Random transistor and a heat sink (Pic) Untested


Check out my other post for a few remaining Playchoice games: http://forums.arcade-museum.com/showthread.php?t=249738


Thanks so much!
 
Last edited:
Okay, I have a bunch of these on eBay now. I adjusted some of the prices as well and updated the solds. Feel free to make me an offer, as I would rather sell on here!

Thanks!
 
Back
Top Bottom