Tonights Game Score

djw90

Well-known member

Donor 2011
Joined
May 14, 2008
Messages
13,112
Reaction score
112
Location
spokane, Washington
Qbert is nice. CP, Bezel, Marquee, Coin Door and cab all nice, Knocker is working!!:D No Side art, could use a cap kit.

qbert1.jpg


qbert2.jpg
 
Really? More than a Pole Position? Love Qbert...I need to get one someday.


Not sure I have not moved a Pole Position in a few years.

I was looking at Qbert websites and I found this. I have never seen one of these qbert pins. I need one:)

qbertquest.jpg
 
That Q*bert pin isn't that great. I played it at the Pinball Hall of Fame a couple years ago.
 
Geeze, another Q*bert thread. Great find, though. There is a sound mod that you need to do right away if it has not already been done. I don't have all the info but the audio amp is powered by a voltage supply that is 2V higher than what the max rating of the amp is. There is a mod with a Zener Diode that will bring the voltage down to 27V from 30V. This is very important as the audio amp is very hard to find a replacement for.

Definitely a nice get. I sure wish I had one.
 
Geeze, another Q*bert thread. Great find, though. There is a sound mod that you need to do right away if it has not already been done. I don't have all the info but the audio amp is powered by a voltage supply that is 2V higher than what the max rating of the amp is. There is a mod with a Zener Diode that will bring the voltage down to 27V from 30V. This is very important as the audio amp is very hard to find a replacement for.

Definitely a nice get. I sure wish I had one.

Is there a thread on this?? Could you send me a link? Thanks for the info:D
 
Is there a thread on this?? Could you send me a link? Thanks for the info:D

Yes, check with Riptor for the parts needed (kit) and anything you want to know about it.

Who sells Qbert Sideart?? I dont want the cheap inkjet stuff they are selling on ebay.

Phoenixarcade for the side art

Mikesarcade for the bezel

What else do you want to know Mr Man?:D
 
Not sure I have not moved a Pole Position in a few years.

I was looking at Qbert websites and I found this. I have never seen one of these qbert pins. I need one:)

qbertquest.jpg

I posted a semi-related thread about this....

I think the pin is just as rare as Qubes....

Not only sought by Q*Bert collectors, but Gottlieb System 80 aficionados themselves..... Combined that with a *very* low production number = Good Luck in finding one....;)


http://forums.arcade-museum.com/showthread.php?t=166270
 
Nice pickup...

I have a nice repro bezel. you just apply it on a new piece of glass. its real nice.

I also have a marquee signed by the designer... somewhere... :)

Oh, and the Q-Bert pinball is on my virtual pin. you can play it at the show... kinda sucks...
 
Back
Top Bottom