Today's Haul

jbk

Active member

Donor 4 years: 2011, 2013-2015
Joined
Mar 6, 2010
Messages
1,568
Reaction score
20
Location
rivesville, West Virginia
Picked these up today. It took about three hours in the heat to grab and load everything. Needless to say i'm out of space and money. The collection (or obsession) continues to grow.
 

Attachments

  • SANY1922.jpg
    SANY1922.jpg
    64.4 KB · Views: 134
  • SANY1924.jpg
    SANY1924.jpg
    59.6 KB · Views: 149
  • SANY1925.jpg
    SANY1925.jpg
    52.6 KB · Views: 145
  • SANY1923.jpg
    SANY1923.jpg
    42.9 KB · Views: 147
  • SANY1926.jpg
    SANY1926.jpg
    29.1 KB · Views: 144
Awesome haul!!!! I see about 3 or 4 games there I would love to pickup. I need to find a bulk buy like that with a bunch of good games that I can actually afford!
 
That Q*bert has nice side art! Great haul!
G12

Agreed, nice haul.....honestly, I just don't remember Q*bert being that great of a game as a kid. I need to go back and play it some more...it has been decades, maybe I will find a new appreciation for Q*bert.
 
Love the game, although the joystick that is normally on it leaves me cold. If I had one I would swap something else in its place.

Agreed, nice haul.....honestly, I just don't remember Q*bert being that great of a game as a kid. I need to go back and play it some more...it has been decades, maybe I will find a new appreciation for Q*bert.
 
there is a nintendo vs and a DK with street heat conversion behind the scramble. Did anyone see the Bally Paragon in the bed of the truck. The PF and glass are perfect and someone installed a remote battery on the mpu! I plugged in the eight ball and it fired right up, so did the dragon spirit. The Dk monitor works but the board is dead, scramble has a working monitor but the board is not right.
 
I've got a very clean untested scramble pcb.. Pm me if you wanna take a gamble:)

Most of the time scrambles just need a ps rebuild or slap a switcher in it!


there is a nintendo vs and a DK with street heat conversion behind the scramble. Did anyone see the Bally Paragon in the bed of the truck. The PF and glass are perfect and someone installed a remote battery on the mpu! I plugged in the eight ball and it fired right up, so did the dragon spirit. The Dk monitor works but the board is dead, scramble has a working monitor but the board is not right.
 
Here's my garage now. The car has to set out for a few days.
 

Attachments

  • SANY1931.jpg
    SANY1931.jpg
    76.8 KB · Views: 36
there is a nintendo vs and a DK with street heat conversion behind the scramble. Did anyone see the Bally Paragon in the bed of the truck. The PF and glass are perfect and someone installed a remote battery on the mpu! I plugged in the eight ball and it fired right up, so did the dragon spirit. The Dk monitor works but the board is dead, scramble has a working monitor but the board is not right.


I was referring the dragon spirit. Nice that you don't have to replace the mpu on the pin.
 
Last edited:
Update: the punchout works (both monitors), both dart machines work but dirty, qbert has a broken power switch so I'll have to drill the locks and look at it. All of the machines are VERY dirty. The punchout works but the buttons are so crammed with dirt they won't even press.
 
Back
Top Bottom