GrndMstr
New member
Hi all,
First I want to thank all in advance for any help you can give me. My pinball machine decided to stop working when I plugged it in today. When I plugged it in it was hissing kind of funny so I unplugged it and let it sit. I then plugged it back in and it booted fine. When I went to play it the balls would not eject into the playfield. I then tried the flippers and they move very slowly and the left one won't go all the way up. The ball ejector doesn't work as well as the ejector for multiball play. I removed the glass and used a ball in the playfield and all scoring and bumpers work correctly. The display works correctly as well. The machine doesn't recognize the balls when they are in the loader at the bottom. If you unplug it and plug it in it says the unit is missing them. I am hoping someone can help me out here. I laid the backglass down because we were getting ready to move it. I put it back up so we could play it before we moved it. I don't see any severed wires. I was hoping someone would be able to point me in the right direction.
Thanks again in advance!
First I want to thank all in advance for any help you can give me. My pinball machine decided to stop working when I plugged it in today. When I plugged it in it was hissing kind of funny so I unplugged it and let it sit. I then plugged it back in and it booted fine. When I went to play it the balls would not eject into the playfield. I then tried the flippers and they move very slowly and the left one won't go all the way up. The ball ejector doesn't work as well as the ejector for multiball play. I removed the glass and used a ball in the playfield and all scoring and bumpers work correctly. The display works correctly as well. The machine doesn't recognize the balls when they are in the loader at the bottom. If you unplug it and plug it in it says the unit is missing them. I am hoping someone can help me out here. I laid the backglass down because we were getting ready to move it. I put it back up so we could play it before we moved it. I don't see any severed wires. I was hoping someone would be able to point me in the right direction.
Thanks again in advance!