Thick Black Lines

MKIIKevin

New member
Joined
Feb 20, 2012
Messages
4
Reaction score
0
Location
Ohio
393008_10100525423863552_298722763_n.jpg


*Let me know if the image doesn't show so I can change the host*

This is a Mortal Kombat II with a Hantarex Polo monitor chassis. The flyback went bad a few weeks ago so I had a new one installed. It was tested in another machine for quality before given back to me and he said I might need to do a few adjustments to get the picture just right. All I did after re-installing was adjust the focus a bit to what it looks like now in the picture.

These thick black lines are now in the picture (were not there before the flyback went bad) and I'm not sure how to get rid of them. My technician friend who installed the flyback said to check the grounds or adjust the power. I checked all the connections and am pretty sure everything is installed back the way it came apart.

Any helpful hints? Much appreciated.
 
Hmm, if the problem (as stated in the url slots posted) is an "aftermarket" flyback install into an original Polo chassis, does that mean I could be SOL unless I find another original flyback?

What I find odd is how when the chassis was installed into a Hantarex MK4 machine for testing it looked just fine. I believe it did a burn in test for 24 hours and then left on in attract mode for 24 more hours to assure quality.
 
Back
Top Bottom