The diverter gate on my the getway is sticking open. Anything I can do without taking that ramp off? And how do I get to that solenoid?
Also I was looking at the accelerator board on the bottom of the playfield, a transistor has been replaced by a different one of a different rating. I looked up the specs and its close but not exact. The area of the board is cooked. Resistor is burnt and the traces are black. I dont know if this is from when the transistor was replaced or if its happening now. Should I replace this transistor with the TIP36C that is supposed to be there? Or as long as it works let it go? Thanks
Also I was looking at the accelerator board on the bottom of the playfield, a transistor has been replaced by a different one of a different rating. I looked up the specs and its close but not exact. The area of the board is cooked. Resistor is burnt and the traces are black. I dont know if this is from when the transistor was replaced or if its happening now. Should I replace this transistor with the TIP36C that is supposed to be there? Or as long as it works let it go? Thanks