Testing transformer power supply on spyhunter

dyno

Well-known member
Joined
Apr 11, 2009
Messages
1,644
Reaction score
81
Location
Lower Mainland, Britsh Columbia
I haven't done it for a while and can't remember how to check the output voltage on a transfomrer power supply for my spyhunter. I have the schematics and it has 2 wires for 12v, 3 wires for 8 v , 1 wire for 15 v and 2 wires for 5 v. I assume my multi should be set to dc. I tried to put the one probe on the wire and the other to ground but it doesn't show anything and from working on my pacman a long time ago I am pretty sure I am not doing it right. How do I know what pins to check together on the connector?
 
Last edited:
Back
Top Bottom