Terminator 2 Sound and Gun Issues

SeanK

Member
Joined
Feb 7, 2021
Messages
89
Reaction score
27
Location
Eagle, Wisconsin
Hey Everyone, this would be the item that there's some threads about that I've tried and haven't worked out. When I first bought my T2 about 6 months ago I decided to completely restore it as the bottom corners were beat to hell. I'm almost done except for 2 things, restoring full functionality to my guns and the usual not working sound. The sound worked when I first got it but it was awful. It sounded like a blown speaker which I looked at it and the paper was in poor shape. I replaced the speaker after doing research here and it sounded the same. I went to play it again only this time, no sound. I took Mecha's advice and replaced the capacitors with ones that I had in stock (not the Axial). Sure enough there were multiple leaks and when I reinstalled it, it worked but with the same muffled sound which would go away if I turned the volume up a lot. It lasted for about two minutes and stopped. I ordered a cap kit from Peter and when I changed all of the caps including axials, I noticed that Capacitor C86 had leaked from the first change, I thought maybe a old cap. After installing the new caps, nothing, still no sound at all. I've also read about a possible crystal issue as well as roms. I don't have a scope and I hate being a parts changer and I want to learn. Any thoughts?

As far as the guns, I want to put two new recoil feedback solenoids, where is the best place to purchase? Thank you for reading my post.
 
Back
Top Bottom