Tempest PCB mounting hardware

JoeB1355

Well-known member
Joined
Dec 11, 2010
Messages
1,631
Reaction score
99
Location
Seymour, Tennessee
FOUND Thanks!

I don't have any. Pic attached.

Whats supposed to secure it originally? Anyone got pics? or extras?
 
Last edited:
It should be done the same as the ARII. I can see it still has the small black 'washer'.
I think the washer goes behind the PCB to fill the gap between it and the wood, but that part I'm not sure of.
 
I think the only securing of the PCB was a screw through the top PCB mounting hole (closest to the cabinet) to that 2 inch square piece of plywood mounted to the front of the rail. There should be a hole in that.

I have never tried to mount it or seen it mounted to it.
 
Digging around I found a pic that looks like this:

Anybody have some extras of that?
 
Last edited:
You want the white tube looking PCB spacers. One will go between the 2 boards, then one between the back board and cabinet. A long coarse thread screw goes through it all, into the cabinet. Bob R has em - here's a pic from his site

mixedbag.gif
 
No extras, but this is what mine looks like:

attachment.php


There's a ~1" (1¼"?) long philips-head screw. Black plastic insulators either side of the PCBs, white tube stand-off that the screw goes through. Then a washer, lock, and nut on the end.

You should be able to find most of that at a hardware store. I'm not sure about the S-shaped bracket, but it's 1⅜" long. Doesn't look too hard to fabricate, if it comes to that.
 

Attachments

  • IMG_5165.jpg
    IMG_5165.jpg
    95.4 KB · Views: 67
Thanks for the pic!

I guess I'll start locating the pieces unless some has the bits a(mostly just the metal s bracket) the rest should be easy enough to find I think.

Bracket anyone?
 
Last edited:
I'm still looking for this L-Bracket. I could also use the nylon spacer and the other hardware.

Attached is yet another pic of what I need
 
Last edited:
Back
Top Bottom