Tempest PCB #1 SOLD
This unit is almost working. It plays perfectly and passes self test.
However one of the pokeys has a bad distortion level. It either effects the explosion sound or the warp sound, depending on what slot it is in.
Otherwise it works.
I realized that my drawer of pokeys is occupied by eight dead pokeys so I literally do not have a spare to swap into this.
Tempest PCB #2
Complete other than missing pokeys (they were dead)
There are two bad rams (which I have not replaced) and the ROMs are not reading right. None of them. So I suspect some part of the memory controller. Consider this very much tested - not working.
Prices
Tempest PCB #1 - Shooting for $275 SOLD
Tempest PCB #2 - Shooting for $150 SOLD
Take Both for $400 shipped.
===================================================================================
Other Tempest Parts
$175 - Populated Tempest Control Panel. Cone buttons light up and all buttons work. Spinner does not work currently, but does spin freely. I have spare optos and I'll fix and test it for anyone that buys it.
$150 - Populated Tempest Control Panel - Untested - Slightly Better Shape
$85 - Tempest Coin Door (From an Irish Tempest) Dusty
$100 - Tempest Coin Door (American Model) Slightly Nicer
Near as I can tell, these are the same.
$150 - Unhacked Tested Good Irish Tempest Harness, complete with volume pot
$150 - Unhacked American Tempest Harness, complete with volume pot. Untested
Near as I can tell, these are the same.
$25 - Tempest Bezel Bracket and Grille
$300 - Untested Color Vector Power Brick - Definitely needs a new fuse block
MMAO - Irish Tempest Marquee on Glass (Damaged)
MMAO - Speaker / Marquee Light fixture sledge/drawer
MMAO - Whatever parts you need from a second damaged tempest sledge/drawer
This unit is almost working. It plays perfectly and passes self test.
However one of the pokeys has a bad distortion level. It either effects the explosion sound or the warp sound, depending on what slot it is in.
Otherwise it works.
I realized that my drawer of pokeys is occupied by eight dead pokeys so I literally do not have a spare to swap into this.
Tempest PCB #2
Complete other than missing pokeys (they were dead)
There are two bad rams (which I have not replaced) and the ROMs are not reading right. None of them. So I suspect some part of the memory controller. Consider this very much tested - not working.
Prices
Tempest PCB #1 - Shooting for $275 SOLD
Tempest PCB #2 - Shooting for $150 SOLD
Take Both for $400 shipped.
===================================================================================
Other Tempest Parts
$175 - Populated Tempest Control Panel. Cone buttons light up and all buttons work. Spinner does not work currently, but does spin freely. I have spare optos and I'll fix and test it for anyone that buys it.
$150 - Populated Tempest Control Panel - Untested - Slightly Better Shape
$85 - Tempest Coin Door (From an Irish Tempest) Dusty
$100 - Tempest Coin Door (American Model) Slightly Nicer
Near as I can tell, these are the same.
$150 - Unhacked Tested Good Irish Tempest Harness, complete with volume pot
$150 - Unhacked American Tempest Harness, complete with volume pot. Untested
Near as I can tell, these are the same.
$25 - Tempest Bezel Bracket and Grille
$300 - Untested Color Vector Power Brick - Definitely needs a new fuse block
MMAO - Irish Tempest Marquee on Glass (Damaged)
MMAO - Speaker / Marquee Light fixture sledge/drawer
MMAO - Whatever parts you need from a second damaged tempest sledge/drawer
Attachments
Last edited:


