tempest/major havoc conversion A/R II board question

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,145
Reaction score
2,593
Location
Eureka, California
tempest/major havoc conversion A/R II board question

I just rebuilt a guys a/rII board (tempest) a couple weeks ago and the 4 big caps were 3300uf 35v (something like that) and they had replacements in Bob's kit, no problem.

So I pull the a/rII board out of my major havoc (tempest conversion) and the 4 big caps are 4700uf 35v, and again Bob's kit has 3500uf or 3300uf 35v replacements. He says it should be no problem because the schematic calls for the 3300(or 3500 can't remember).

Anyway, this long story is to ask the question:

Is there anything tricky because it's major havoc in a tempest?

I figure it's just as Bob says, but I always like to be safe before I start plugging shit in.
 
edit:

I just went with the kit the way it comes from bob and all is well with my major havoc now.

fixed my distorted screen issue that I outlined in another thread.
 
Last edited:
Back
Top Bottom