VertexGuy
Well-known member
Got a mint tempest cab , when i got this it was missing boards , monitor , harness.
It does however have original marquee light , speaker assembly.
will come with tempest power brick , tinted front bezel.
I ended up repainting the sides flat white and dusting it with some clear.
Was gonna put tempest side art on but didnt wanna sink too much into her.
then new t molding on.
Threw in a 19" lcd and a multiboard that does have tempest and works with a trackball.
The coindoor is in tact, but the coinbox is missing.
has a 412 in 1 board installed .
Has NOS tempest CPO.
If you are looking for a tempest replacement cab with no water damage or looking
to make a MH conversion this would do the trick. its already set up to use a multivector
board . has a wico joystick and trackball.
the capcom marquee is a sticker and can be removed by peeling it off.
I already have a tempest i rebuilt and i would have done this one but those monitors are hard to find.
$625 or trade
looking for carnevil or decent crane machine



It does however have original marquee light , speaker assembly.
will come with tempest power brick , tinted front bezel.
I ended up repainting the sides flat white and dusting it with some clear.
Was gonna put tempest side art on but didnt wanna sink too much into her.
then new t molding on.
Threw in a 19" lcd and a multiboard that does have tempest and works with a trackball.
The coindoor is in tact, but the coinbox is missing.
has a 412 in 1 board installed .
Has NOS tempest CPO.
If you are looking for a tempest replacement cab with no water damage or looking
to make a MH conversion this would do the trick. its already set up to use a multivector
board . has a wico joystick and trackball.
the capcom marquee is a sticker and can be removed by peeling it off.
I already have a tempest i rebuilt and i would have done this one but those monitors are hard to find.
$625 or trade
looking for carnevil or decent crane machine



Last edited:





