SOLD - PARTS Tempest Cabaret Project/Parts

jdoz2

Active member
Joined
Apr 30, 2012
Messages
612
Reaction score
71
Location
SPRINGFIELD, Missouri
Rating - 100%
12   0   0
I got this stuff from a buddy with some other projects and I think Im going to focus on the others and let this one go. I'd like to sell this all to one person but I would entertain selling off parts if there is no interest.

- 2 complete, but non-working PCBs. plus two main boards and one Aux board.
- New tempest Cabaret harness
- 2 cpos. One is a nicer quality and textured. The other is more glossy and has a visible line down the middle, but figured I'd list this even though I probably wouldn't use it.
- Phoenix Arcade cabaret side art
- Phoenix Arcade mini marquee
- Upright populated control panel
- New cabaret metal control panel from high score saves I believe?
- vector Atari brick
- Centipede Cabaret to convert over to Tempest. Some of the bottom edges are a little soft, but should restore nicely.
- There is NO monitor. I think Vector/VGA would be the easiest solution for this and what I would have pursued

Willing to ship if you set it up and pay for it.

$600 for the whole lot. Can get more photos if interested.
 
I got this stuff from a buddy with some other projects and I think Im going to focus on the others and let this one go. I'd like to sell this all to one person but I would entertain selling off parts if there is no interest.

- 2 complete, but non-working PCBs. plus two main boards and one Aux board.
- New tempest Cabaret harness
- 2 cpos. One is a nicer quality and textured. The other is more glossy and has a visible line down the middle, but figured I'd list this even though I probably wouldn't use it.
- Phoenix Arcade cabaret side art
- Phoenix Arcade mini marquee
- Upright populated control panel
- New cabaret metal control panel from high score saves I believe?
- vector Atari brick
- Centipede Cabaret to convert over to Tempest. Some of the bottom edges are a little soft, but should restore nicely.
- There is NO monitor. I think Vector/VGA would be the easiest solution for this and what I would have pursued

Willing to ship if you set it up and pay for it.

$600 for the whole lot. Can get more photos if interested.
Oh, this is tempting. Sure wish you had an Atari Tempest cabaret cabinet. If you breakup the lot, there are a few things I could use.

Scott C.
 
I am hoping it's priced aggressively enough that someone will take the whole package, but I will let you know. I got a good deal on this stuff from my friend so not looking make a bunch off this.
 
I do not but attached is a photo of them. IMG_1425.jpeg
 

Attachments

  • IMG_1418.jpeg
    IMG_1418.jpeg
    990.7 KB · Views: 13
  • IMG_1419.jpeg
    IMG_1419.jpeg
    933.1 KB · Views: 6
  • IMG_1420.jpeg
    IMG_1420.jpeg
    968.3 KB · Views: 6
  • IMG_1421.jpeg
    IMG_1421.jpeg
    884.5 KB · Views: 5
  • IMG_1422.jpeg
    IMG_1422.jpeg
    969.9 KB · Views: 4
  • IMG_1423.jpeg
    IMG_1423.jpeg
    973.1 KB · Views: 4
  • IMG_1424.jpeg
    IMG_1424.jpeg
    950.5 KB · Views: 12
Back
Top Bottom