gorfchampion
New member
I added some things to my Emergency Booth last nite. I'm making this stuff up as I go...
The teleport/timewarp feature is available for emergency relocation if needed.
I'm making a flyer/instruction pamphlet that will be attached to the booth next to the phone. It will read:
"To activate teleport/timewarp turn toggle switch on, wait for green light, then throw knife switch. All objects within 6 feet of Emergency Booth will pass thru portal. Warning: implosion upon re-entry possible. Date, time, and location of final destination is random. Use only as last resort to escape UFO."
First pic: This is an old Ham radio double bladed knife switch on top. Under that is a Cole-Hersee(Boston, USA) toggle switch. I cut the back off, then used a 3/4 wood drill to make room for the slide mech in the back so it could operate freely. Under that is the red/green lights(came off an old electric fence tester). Then I relocated the CO2 guage/detector under that.
Pic 2: closeup of the Ham radio knife switch. I ran a short length of copper wire to the main power line for looks.
Pic 3: closeup of the toggle switch
Pic 4: closer shot of lights and CO2 detector.
I love this stuff!
The teleport/timewarp feature is available for emergency relocation if needed.
I'm making a flyer/instruction pamphlet that will be attached to the booth next to the phone. It will read:
"To activate teleport/timewarp turn toggle switch on, wait for green light, then throw knife switch. All objects within 6 feet of Emergency Booth will pass thru portal. Warning: implosion upon re-entry possible. Date, time, and location of final destination is random. Use only as last resort to escape UFO."
First pic: This is an old Ham radio double bladed knife switch on top. Under that is a Cole-Hersee(Boston, USA) toggle switch. I cut the back off, then used a 3/4 wood drill to make room for the slide mech in the back so it could operate freely. Under that is the red/green lights(came off an old electric fence tester). Then I relocated the CO2 guage/detector under that.
Pic 2: closeup of the Ham radio knife switch. I ran a short length of copper wire to the main power line for looks.
Pic 3: closeup of the toggle switch
Pic 4: closer shot of lights and CO2 detector.
I love this stuff!
