Tekken4 (Namco 246) Showcase Power Supply

AtariBorn

New member
Joined
Apr 19, 2011
Messages
19
Reaction score
1
Location
Conway, Arkansas
I have a Tekken 4 showcase cab with a bad power supply. I have a few of the black 110 power supplies you find in a lot of cabs, like this...

80006400_lrg.jpg



but this one has a silver finish and holes all in it, like a cage, like the image below...

80021500_lrg.jpg


On Happ's website, these are different power supplies. There are a few different ones at Happ, which one do I need to replace this?
 
Last edited:
Sys246 is standard JVS, I can't find a pinout but yeah... any PSU that produces the right voltages with enough current will work, don't sweat it.
 
I did. My only concern was that the power supply that was in it looks like a 120 watt at Happ and all I had was 110 watt. All of my cabs are running the 110's except for a couple proprietary and I had never seen the 120 watt, so I was being precautious.

But it works and I haven't had any problems, besides the marquee ballast blowing fuses, but hey I can replace all that too.

Thanks, by the way.
 
Back
Top Bottom