Fatsquatch
Active member
Alrighty, after 7 months, hundreds of dollars, and countless hours of labor, I'm at the finish line of my Twister restoration. The game is fully playable, except for that the magnet board does nothing.
All fuses/wiring is good and I've done the mod suggested by Stern, but the board appears to be dead. (Neither of the MAG LEDs light up.)
Obviously, I need to check for voltages going to the board, but I'm unsure of the proper way to do this. Anyone in the mood to school me on this?
All fuses/wiring is good and I've done the mod suggested by Stern, but the board appears to be dead. (Neither of the MAG LEDs light up.)
Obviously, I need to check for voltages going to the board, but I'm unsure of the proper way to do this. Anyone in the mood to school me on this?