NCC-1701
New member
I need some help with R48, combo value pale blue ceramic resistor, mounted on the tube side of the amp between 5U4 and 6L6. I have a reading on the 2500 but dead on 25K, obtained a 27K replacement but not sure how to rewire onto the old 3 leg resistor. I marked my old disconnected wires as follows:
A=1 Ivory color cloth wire, 1Gray wire
B= 2 Red wires
C= 1 Brown wire, 1 bare, both going to ground
appreciate any help, thanks guys
A=1 Ivory color cloth wire, 1Gray wire
B= 2 Red wires
C= 1 Brown wire, 1 bare, both going to ground
appreciate any help, thanks guys
