Tech Nine Ball Blown Feature Lamps

butthead

New member
Joined
Nov 30, 2008
Messages
498
Reaction score
4
Location
bath, Pennsylvania
I went & fired it up last and all the feature lamps were off.
I checked the fuse and it was good, poked around some more only to find out all the lamps were blown. All lamps that go to f1 were shot but 3.
Bridge rectifer going bad ? I have 6 volts.
Thanks for any input,
Tom
 
Weird... have you done any work to the machine recently?

Usually that happens when you do something like shorting the solenoid voltage to the feature lamps voltage... or something like that.

What does the rectifier board look like? You might have some shady hacks causing a short.
 
I havent play it in a while, it was moved once to the other side of basement and not played since. It was working perfectly, but just does get the love the other ones get.
I just dont want to have my head shoved under that playfied for two hours changing bulbs to have it happen again, No hacks, Rectifer board was gone over when I got it so was the lamp driver board. Weird was my thought also.
 
Back
Top Bottom