Tech: New Pepsi Machiene Need Help

Fatality83

Member
Joined
Oct 10, 2011
Messages
854
Reaction score
24
Location
manchester, Pennsylvania
Hey guys I got a Dixie Narco model of unknown year. It has 6 larger buttons on. I managed to find out how to cycle the motors on it, however when you put change in it doesn't work. Is there any people on here that know how to trouble shoot these machines or recommend a website that deals with fixing them. I will need some parts like buttons and decals for the side and such. Any recommanations? Thanks
 
its a model dncb 240/138-6

I pulled the coin mech out to look at it. There is several switches inside that I assume the coins press down to let the machine know that money was put in. I plugged the coin mech back in and manually actived the switches. The machine still wont vend. Like I said, the motors do turn though when I manually activate the switches on the motors.
 
Just wanted to let everyone know that I got it working! Not exactly sure what I did that fixed it, but I pulled the coin mech out and torn it apart. I played with all the switches inside and pulled out the circuit board that mounts in the coin mech and reflowed solder joints on the header pins. After I reinstalled it, it now works, although it is set on 1.50 and I need to find out how to change it. I assume with the 4 dip switches under the coin mech but not sure which ones do what. So I still do need to find out where to get some parts like buttons and maybe new coin door and reproduction stickers and such. If anyone knows I would appreciate it.
 
Few thingsto check--

Make sure you have product in the machine.. atleast a few cans in each column.

Make sure you have change in each of the change tubes..

For the dip switches.. Try turning on the 2 on the left and turn off the ones on the right. The coinco manuals are around on the net.. Google the model number.

Not sure where to get parts for the DN machines..
 
Back
Top Bottom