iamjoemamma
Member
I got this game from a friend to look at and I am not real well versed on mega touch repair. The problems are:
Boot up and it gives error CMOS CHECKSUM ERROR - DEFAULTS LOADED
hook up keyboard hit f-1 and boot. all is fine. Power down and restart same issue. I think this is b/c battery is not on board on top of MB (no battery on MB that I saw?????). It came with no battery so I am not sure what size to install but it should be 3vdc I think. I got a 3vdc today and after installing it today I get an error:
INVALID KEY FOR VERSION PG3002-01 V22.02. Machine will reboot over and over
If I put a battery in and config CMOS like this:
CMOS CONFIGURATIONS
N-Force (ION)
1 - Plug a keyboard into the purple port connector (PS2)
2 - Power the game on. Press DEL to enter SETUP.
3 - Arrow over and down to Load Optimized Defaults.
4 - Press ENTER. Press Y for "Yes".
5 - Press F10, Press Y for Yes.
6 - The system should reboot. Unplug the keyboard.
Next error is:
INVALID KEY FOR VERSION PG3002-01 V22.02. Machine will reboot over and over.
Pull the battery, connect keyboard and hit f-1 and it boots and plays fine. I know I'm missing something easy here and plan to print a manual tomorrow. I started reading it and it seems I have a lot to learn about these games. Set up of each game is a process I will take through the manual after I get it booting without faults.
Thanks for reading this long question and helping a beginner!
Chris
Boot up and it gives error CMOS CHECKSUM ERROR - DEFAULTS LOADED
hook up keyboard hit f-1 and boot. all is fine. Power down and restart same issue. I think this is b/c battery is not on board on top of MB (no battery on MB that I saw?????). It came with no battery so I am not sure what size to install but it should be 3vdc I think. I got a 3vdc today and after installing it today I get an error:
INVALID KEY FOR VERSION PG3002-01 V22.02. Machine will reboot over and over
If I put a battery in and config CMOS like this:
CMOS CONFIGURATIONS
N-Force (ION)
1 - Plug a keyboard into the purple port connector (PS2)
2 - Power the game on. Press DEL to enter SETUP.
3 - Arrow over and down to Load Optimized Defaults.
4 - Press ENTER. Press Y for "Yes".
5 - Press F10, Press Y for Yes.
6 - The system should reboot. Unplug the keyboard.
Next error is:
INVALID KEY FOR VERSION PG3002-01 V22.02. Machine will reboot over and over.
Pull the battery, connect keyboard and hit f-1 and it boots and plays fine. I know I'm missing something easy here and plan to print a manual tomorrow. I started reading it and it seems I have a lot to learn about these games. Set up of each game is a process I will take through the manual after I get it booting without faults.
Thanks for reading this long question and helping a beginner!
Chris