blbarchik
Member
I just purchased a Genco state fair rifle gallery. It's in partially
working condition. Basically it turns on and will fire with recoil and
some targets will drop. I immediately recognized the selenium
rectifier on the transformer, and I will have to put a modern bridge
rectifier instead. If anyone has any tips or can send me some pictures
of your rifle game, it will be appreciated.
Also, I would like to know what is your point of reference when
adjusting the rifle stylus on the board so that when you aim correctly
at a target it registers.
working condition. Basically it turns on and will fire with recoil and
some targets will drop. I immediately recognized the selenium
rectifier on the transformer, and I will have to put a modern bridge
rectifier instead. If anyone has any tips or can send me some pictures
of your rifle game, it will be appreciated.
Also, I would like to know what is your point of reference when
adjusting the rifle stylus on the board so that when you aim correctly
at a target it registers.