jwe
Active member
I have a DK Jr that was converted to a DK 3. It had the DK Jr board installed when I got it and the picture does not fill the screen, no matter what I adjust. The previous owner stated that the picture shrank when he installed the DK Jr PCB versus the DK3 PCB. Can someone please confirm if they had the same thing happen to them. I'm thinking it's a board issue but I don't have another one to confirm. Please see the attached pic when I got it. I have since changed the adjustment pots on the PCB which made it a little better but it's still not wide enough. It may also need a cap kit but the picture does look good otherwise.
Thanks,
John
Thanks,
John