Tech: Blue Elf Kick harness

Gkar

New member
Joined
Feb 9, 2009
Messages
563
Reaction score
0
Location
Montana
Who knows how / where to connect the kick harness ( 6 kick buttons ) on a CPS1 cabinet to the blue elf 2 PCB with jamma adapter?

Jeremiah
 
Alright, Does anyone know off the top of their heads the answer?

There is no kick harness connector on the Blue Elf, if you had read the thread I linked to you would have realised this.

FYI the Blue Elf kick buttons are on the edge connector. You have to change some of the ground wires to signal wires on your Jamma Harness.
 
Thanks Man

I will give this more review

Jeremiah

There is no kick harness connector on the Blue Elf, if you had read the thread I linked to you would have realised this.

FYI the Blue Elf kick buttons are on the edge connector. You have to change some of the ground wires to signal wires on your Jamma Harness.
 
I answered your PM but yeah you should really read the thread and do some research.

Typo below.

"These last two pins on the game Cab JAMMA side need to be shorted."

On the board side they are not both grounds.

attachment.php

If this makes no sense to you, then I really can't help you. You should buy an adaptor from someone.
 
Last edited:
Alright got it figured out thanks to all who replied.
 
Back
Top Bottom