Museum of the Game® & International Arcade Museum® Forums

Here is a video of it I took last night:


Here are pics of the setup:

IuCe74o.jpg

LID9WCz.jpg

WVRZ25F.jpg

f8zuvmc.jpg

There is a relay in the pic and a little circuit as well, but don't mind that - that was to get this to boot up properly with my multi JAMMA setup that is in my signature. In the video I have above neither of those are in play.

I am not going to include the wooden board though as it's just too big/heavy. That is just how I had it mounted. You will receive the following:

- I/O gun board (v1.9 - I had issues with v1.8 on this kit)
- TTG Dongle (parallel port one in the pic)
- Motherboard with cpu/ram/video card
- SSD with an sata -> IDE adapter that is used for the drive (works fine)
- All the cables that are seen in the pic to make it work plug/play for you (aside from PSU power plug mentioned below)
- Power Supply (however you will need your own plug as I don't have any spares)

I am asking $500 shipped OBO, feel free to MMAO!
Back
Top Bottom