taito under fire harness help

eyeless

Member
Joined
Jun 20, 2011
Messages
445
Reaction score
8
Location
Brooklyn, Michigan
I'm trying to figure the harness pinout. The guy I bought this from sent it to me in a big cluster. From what I can somewhat see on a manual online I'm looking at :

1/2/a/b are ground (black wire)

3/c are +12v (blue wire)

4/5/6/d/e/f are all +5v (red wire)

8/9/j/k - I cant make out on the pdf file, looks like + something (yellow wire).

unless I am reading the manual wrong and I'm just completely off...

Any help would be much appreciated.
 
Last edited:
hi, a friend pointed me to your post. i have a working Under Fire and i can probably help you. send me a private message and i will verify with my machine when i get the chance. what's the scenario, by the way? are you trying to install it into some generic cabinet? do you have the original guns and infrared receivers? this didn't, by any chance, come from hawaii did it? not too many of this title are in working condition.
 
I have one here too, so just let me know if you need any pictures for reference or if I can verify anything for you.
 
Back
Top Bottom