Taito Trimline Space Invaders Wiring Harness

NERDtendo

Well-known member

Donor 2011
Joined
May 14, 2010
Messages
4,672
Reaction score
357
Location
Republic, Washington
Rating - 100%
313   0   0
This harness is complete minus the power cord, on/off and back door switches which were seperate cords. It is most unhacked. I took pictures detailing the two sets of wires that got cut. One set was soldered into the isolation transformer for the monitor. The other was soldered into the coin counter which was inside the coin vault. The coin counter wires were soldered inside the vault so it could not be extracted through the small hole the wires came through.

$45 shipped.

COMBINE THIS THREAD WITH OTHER PARTS FROM THE CAB IN THIS THREAD HERE... http://forums.arcade-museum.com/showthread.php?t=177870
 

Attachments

  • SI Harness.jpg
    SI Harness.jpg
    99.1 KB · Views: 7
  • SI Monitor ISO Transformer.jpg
    SI Monitor ISO Transformer.jpg
    98 KB · Views: 4
  • SI Coin Counter.jpg
    SI Coin Counter.jpg
    102 KB · Views: 3
Last edited:
Back
Top Bottom