Taito Space Invaders trimline speaker specs

debaser138

Well-known member
Joined
Mar 1, 2009
Messages
1,029
Reaction score
64
Location
Grand Rapids, Michigan
Can anyone tell me what the specs are on the speaker for a Taito Space Invaders trimline? The manual isn't much help as it just says "speaker".

Any info would be appreciated. Also looking for a speaker cover for this cabinet as well. Thanks!
 
you probably want this in the restore section. If someone doesn't respond before tomorrow, I have a couple in pieces in storage and will see if I have the speaker and cover.
 
you probably want this in the restore section. If someone doesn't respond before tomorrow, I have a couple in pieces in storage and will see if I have the speaker and cover.

I don't think I can move it to that sub forum and would have to repost.

If you can look and see if you have the speaker and cover that would be greatly appreciated. Thanks!
 
So, these were in my parts box from two SI trimline. I assume it is accurate but didn't pull them directly myself.

Speaker is a 5x7 8ohm 5watt

dimensions match this from http://www.turnswitch.com/speakers.htm
Size: 5" W x 7 1/4"L. 2 1/8" deep. 4 3/8" mounting centers - both directions.
 

Attachments

  • 2016-07-13 17.30.12.jpg
    2016-07-13 17.30.12.jpg
    191.6 KB · Views: 35
So, these were in my parts box from two SI trimline. I assume it is accurate but didn't pull them directly myself.

Speaker is a 5x7 8ohm 5watt

dimensions match this from http://www.turnswitch.com/speakers.htm
Size: 5" W x 7 1/4"L. 2 1/8" deep. 4 3/8" mounting centers - both directions.

Those look right. How much you want for them with shipping to 49505?
 
Back
Top Bottom