Taito Power Supply Board

Cliffo

Member

Donor 2016
Joined
Nov 15, 2009
Messages
589
Reaction score
11
Location
BC, Canada
Does anybody recognize this board? I'm looking for schematics and pinout details. I'd like to try using it, but suspect it needs some work first, as the cab had a switcher in place.
 

Attachments

  • Parts (1).jpg
    Parts (1).jpg
    99.5 KB · Views: 46
Does anybody recognize this board? I'm looking for schematics and pinout details. I'd like to try using it, but suspect it needs some work first, as the cab had a switcher in place.

My Qix came factory with one of those supplies.

Edward
 

Thank you that's what I needed...

Those are problems. You are better off with the switcher in it.


See opinions from others here
http://forums.arcade-museum.com/showthread.php?t=116131

Hmmm, I was planning to use it as a test bench supply, but I think that would be a mistake if it's such a POS. Probably make troubleshooting even harder...

Wall Art or robbed for bits I suppose...
 
I second those PS being POS... I have dealt with a few and they all had issues, replaced them all with switchers. I have a stack of them in my garage if you need parts though!!
 
You can find a PS schematic here.
http://pdf.textfiles.com/manuals/ARCADE/SMALLFILENAME/zookeeper.pdf

Those are problems. You are better off with the switcher in it.


See opinions from others here
http://forums.arcade-museum.com/showthread.php?t=116131

Well I replaced my front line original ps with a switcher because of sound issues and now have issues with the joystick being less responsive the longer you play the game. I thought it might be a grounding issue with the switcher, but after I added another ground wire to connect directly to the cp controller ground still have the problem. The original ps doesn't have that problem. Anyone else experience this when changing to a switcher? I know in spyhunter the switcher struggles with ground issues.
 
Back
Top Bottom