Taito Operation Tiger manual/pinout anyone ?

t152

Member
Joined
Oct 16, 2007
Messages
65
Reaction score
1
Location
Zurich, Zurich, Switzerland
I finally cought a board I didn't see often appearing on ebay. It's in very good shape but came without manual so I'm not 100% sure about the connectors I see on the backside (the filter board). Does anyone have more specific information on these connectors which are marked 'S' (Steering??), 'V' (Video??), 'P' (Power??) and 'G2' (which is a double row connector). Thanks in advance.
 
try BAZ - he is 7BAZ on aussiearcades forum too - he recently mentioned he has some 800 pinout sheets in his stash, you might get lucky!
 
its ok im here lol

just been a tad busy.

let me have a look ok ?

i shall get back to your tomorrow :)

this looks to be running off a Taito G Net System ?
 
Last edited:
Hello baz :)
Its an original taito operation tiger board. The filter board reads 'POWER JC FILTER PCB'. thanks

There's actual 3 boards im chasing the manuals/pinouts/wirings of, all taito original games.
A Battle gear 2, a Side By Side 2 and the already mentioned Operation Tiger. If you have
any of them - greaaaaaaaaaaaaaaaaaaaaaaaat :)
 
Back
Top Bottom